MEIKEE Security Lights with Motion Sensor 10W
- Efficient waterproof: LED floodlights-IP66, Sensor-IP65; Improved adjustment knob, prominent design, prevents rainwater from entering the PIR.
- Smart sensor: Three modes can be adjusted (lighting time, sensitivity and detection range). When the PIR motion detector detects motion, Led sensor outdoor light will turns on automatically and quickly response.
- High quality and good service: With CE, FCC certification, lighter, thinner and high quality heat sink, long-lasting heat resistance; with 1.5 meters cable and install accessories, 24 months warranty or get a new one as a replacement to cover any issue about the PIR floodlights.
2018 NEW motion sensor flood light:
1. Sensor upgrade: More sensitive, detection range up to 12 meters; Waterproof coefficient increased from IP44 to IP65.
2. Led beads: brighter and more durable: our new rectangular light board, packaged and sealed by COB,
compared to the single-chip plastic, the brightness increased by 30% and more professional (plastic single chip burns easily in overheated conditions).
3. Reflector: Larger reflective surface, Contrasting smooth reflector, it reduces useless light reflections and refractions, brightness increase.
4. Energy Saving: Achieve the same 60W halogen bulb Equivalent lighting, Save 80% on electricity bill.
5. Stability: The problem of staying light up and blinking can be basically avoided.
How to use:
TIME -- Set the time duration of light 6 seconds for 360 seconds.
LUX -- Switch to "SUN", the sensor works every 24 hours; at "MOON" the sensor works only at night.
SENS -- Adjust the sensitivity of the motion sensor detection distance: up to 12m;Detection range: 180 ° torsion measurement from top to bottom, left and right.
Luminous color: Daylight White
Beam angle: 120°
Working temperature: -25°C~40°C
Sensor detection angle: 180°
Detection distance: 1-12m
Waterproof: Flood light-IP66; Sensor-IP65
Cable length: 1.5m
1. The light was smashed when it was delivered.
2. PIR doesn't' work or Sensor failed after some days.
3. Induction device is not waterproof, full of water.
4. It just kept flashing or staying on all the time.
1*motion sensor light 10W
Tips: If there are any questions, In order to better assist you, please contact us at firstname.lastname@example.org