30W Security Lights with Motion Sensor
Upgraded Waterproof: Sensing device waterproof performance to IP65, Mode key raised design, split water droplets to prevent the sensor head water, outdoor lighting safe and reliable.
Upgraded Appearance: New 30w Security Lights with Motion Sensor is Lighter and thinner, New lamp beads Replace SMD 2835 led bead, Low thermal resistance, resistant to high voltage and high electric current. Without risk of light malfunction high-power LED light source.
Energy Saving: Achieve the same 75W high-voltage sodium lamp Equivalent lighting, Save 80% on electricity bill,bigger luminous surface, at the same power, the brightness for MEIKEE 30w led pir floodlights is 3000lm.
1. New Sensor: More sensitive; detection distance up to 12 meters; Waterproof coefficient from IP44 to IP65, the new protruding adjustment knob can prevent rainwater into the sensor.
2. Light board: Brighter and more durable,Our new rectangle light board packaged and sealed by COB, compared to plastic single-chip.the brightness increased by 30%; Compared to old Light board, the brightness increased by 10%.
3. Reflector: Larger reflective surface, Contrasting smooth reflector, it reduces useless light reflections and refraction,at the same power, the brightness is higher.
4. Design: With CE, FCC Certification; Lighter and Thinner, The new long-lasting heat sink make our product works stably for a long time; With 1.5m cable and mounting accessories, bracket can be rotated,easy to install.
5. Stability advantages: The problem of staying light up and blinking can be basically avoided,Working temperature: -25 ° C ~ 40 ° C.
TIME -- Set the time duration of light 6 seconds for 360 seconds.
LUX -- Switch to "SUN", the sensor works every 24 hours; at "MOON" the sensor works only at night.
SENS -- Adjust the sensitivity of the motion sensor detection distance: up to 12m; Detection range: 180 ° torsion measurement from top to bottom, left and right.
1. The light was smashed when it was delivered.
2. PIR doesnt' work or Sensor failed after some days.
3. Induction device is not waterproof, full of water.
4. It just kept flashing or staying on all the time.
1 x 30w floodlight
1 x instruction manual
2 x Wall fixing screws
If there is any questions, please contact us at email@example.com